How to Perform a Safety Check Before Riding an Electric Dirt Bike

Performing a safety check before riding an electric dirt bike is essential to ensure that the bike is in good working condition and safe to ride. Here’s a step-by-step guide for conducting a pre-ride safety check.

Dirt bike safety checks: a step-by-step guide

Visual Inspection:
- Start by visually inspecting the entire bike. Look for any signs of damage, leaks, loose bolts, or worn-out components.
- Check the frame, suspension, wheels, tyres, brakes, and electrical connections.
Tire Inspection:
- Check the tyre pressure using a pressure gauge and ensure it matches the manufacturer’s recommendations.
- Inspect the tyres for any cuts, punctures, bulges, or signs of excessive wear. Make sure there are no embedded objects.
Brake Check:
- Test both the front and rear brakes to ensure they are functioning correctly.
- Check the brake levers or pedals for proper resistance and responsiveness.
- Inspect the brake pads for wear and replace them if necessary.
Controls Check:
- Test the throttle, clutch and all other controls to ensure they move smoothly without binding.
- Check that the throttle returns to the idle position when released. If it gets stuck there is a screw underneath that loosens it so it releases quicker.
Lights and Signals:
- Turn on the lights if it comes with any, and ensure they are all working correctly.
- Check the horn to ensure it produces a loud and audible sound.
Battery and Electrical System:
- Verify that the battery is fully charged and securely connected. This can be done using the battery meter indicator.
- Check for any loose wires or damaged electrical components.
- Test the electric start system to ensure it’s functioning properly.
Chain and Drivetrain:
- Inspect the chain tension and lubrication. Adjust and lubricate the chain as needed. If it needs tightening, read our blog on how to tighten the chain on an electric dirt bike
- Check the sprockets for wear and replace them if necessary.
Suspension Check:
- Test the front and rear suspensions by compressing and rebounding them several times.
- Ensure there are no unusual noises or signs of leakage from the suspension components.
Final Checks:
- Double-check that all nuts, bolts, and fasteners are properly tightened.
- Verify that the kickstand retracts fully and that it doesn’t interfere with the operation of the bike.

By following these steps and conducting a thorough pre-ride safety check, you can help ensure that your electric dirt bike is in good condition and safe to ride. If you encounter any issues during the inspection, address them promptly before riding the bike.

Why not take a look at our other dirt bike guides?